Each time the cold season is installed, we notice that the closing and opening systems with which the dwelling is fitted do not provide the proper yield by failing to provide an optimal insulation. Often, heat loss is the main cause of general discomfort in your own home, which is not otherwise desired by any person.
Many start thinking that when replacing old wooden windows they will have an optimal degree of comfort in their own home because they will prevent these losses, but a fairly large percentage realizes that there has been no change to this aspect.
What can be the reasons why windows and doors with insulating glass do not insulate properly either thermally or noiselessly? Let’s look at the main situations faced by those who do not pay the attention to choosing the right closure systems.
Why does not the windows insulate properly?
Some owners believe that issues of tightness and isolation arise because they are not being used properly. Even if this is a reason why doors and windows do not properly isolate, the causes are of a different nature.
Window and door manufacturers use different profiles to achieve them. Some focus on quantity and others on quality. When the emphasis is on the first aspect, obviously the results will not be far-fetched. Because the season in which most of us install new windows with thermopan windows is warm, chances are quite high that when installing in the winter, the owners have a lot of supersets.
Our advice is always to keep in mind the quality of the materials used in manufacturing. Although for some it may seem a little exaggerated, it is essential that each piece used should be of high quality, durable and incorporate perfectly in its entirety. For example, when it comes to the production of windows and doors of any kind, whether it’s interior or exterior, we always focus on quality and whoever knows that besides the profile, we need to pay more attention and attention the pieces we use.
Many users are of the opinion that if a manufacturer offers windows with a Rehau or Gealan profile this is enough to guarantee their quality. They lose sight of the fact that glass, metal fittings, fittings and gaskets have a role to fulfill. In fact, it is sufficient that one of them has a quality below expectations so the level of comfort insured will suffer.
When the difference in prices between windows and doors produced by two different companies is too high or even double, users have to ask why that is why they exist. Even if it often happens that the problem is related to the correctness of the producers, this difference generally exists because the component parts are of a higher or worse quality, so the final cost will be lower or higher.
Condensation after cold season installation indicates that there may be problems with sealing between the frame and the sash or between the window and the masonry, or the thermal insulation problem.
Also, when the metal armature used will be thin, obviously it will make its profile curve more easily. If the gasket used is not the best and the fittings do not have a required number of locking points, the PVC joiner will not seal properly and will produce air drafts, hence the heat loss.
Even if all these problems can be resolved to a certain point with the help of a professional service, it would be preferable to choose the best quality windows and doors from the beginning. In this regard, we are waiting for you at our metalglass.ro page with a variety of quality closure models that have a high resistance and are able to always provide the desired yield.